Natural white oak
Veneer or solid timber option
Custom sliding barn doors in timber, veneer and lacquer — exposed or concealed tracks, soft-close hardware and matched handles, made to your opening in Foshan.
George Group builds custom sliding barn doors to your opening schedule in Foshan — leaf size, plank design, track, rollers, handle and finish specified together before production. Standard production is 30–45 days after drawing approval, with mixed-container shipping worldwide FOB or DDP.

Like what you see? Send us your floor plan — we'll draw it up and quote it.
A made-to-order sliding barn door — leaf, exposed track, rollers, floor guide, handle and finish drawn together to your opening, wall support and available travel space.
A barn door saves swing space, but it needs a clear wall for travel and a solid fixing line for the track. Leaf width, overlap, rail length, roller position, skirting clearance and the floor guide all have to be worked out before production. Ours are drawn around your opening and wall, so the leaf and hardware fit the real installation rather than a generic kit.
The door shown here uses vertical natural timber planks with a black exposed rail and long handle. Engineered or solid timber, lacquer colours, soft-close operation and privacy hardware are selected for the room. Every set is labelled by room and opening number and can ship with your wider door and window order.
Dimensions, leaf construction, track hardware, finishes and ordering terms — final values are fixed to the selected system and confirmed on your shop drawings.
| Item | Standard specification |
|---|---|
| Door leaf range | Typical interior leaves run 600–1,200 mm wide, 2,100–2,700 mm high and 35–55 mm thick; final dimensions follow the opening, track and hardware selection. |
| Opening cover & overlap | Leaf width and height are drawn to cover the finished opening with the required overlap, accounting for casing, skirting, floor level and the desired visual reveal. |
| Travel & track length | Track length is selected from the door width, required clear opening and available wall travel; the fully open leaf position is shown in plan. |
| Layouts | Single sliding, paired double and bypass configurations are available, with travel direction, meeting position and wall clearance fixed on the drawing. |
| Item | Standard specification |
|---|---|
| Engineered veneer | Engineered cores with natural timber veneer provide a stable leaf for interior use; core, edge and face materials are selected for leaf size and finish. |
| Solid timber & planks | Solid timber and vertical or horizontal plank designs are available, with species, grain direction, moisture control and movement allowances specified. |
| Lacquer & laminate | PU lacquer in RAL colours, melamine or laminate faces are available for project durability, colour coordination and easier cleaning. |
| Weight confirmation | Leaf weight is calculated from the selected construction and dimensions before rollers, track, wall fixings and soft-close hardware are finalised. |
| Item | Standard specification |
|---|---|
| Track & rollers | Exposed steel or aluminium tracks with system-matched rollers and anti-jump components, selected for verified leaf weight and daily operation. |
| Soft close | Compatible soft-close and damping options control the final travel; the mechanism is matched to leaf weight and track length. |
| Guides & stops | Floor or wall guides, end stops and anti-lift components keep the leaf aligned without requiring a structural floor track. |
| Handles & privacy | Long pulls, recessed handles, privacy latches and compatible locks are available; handle position and fixing are set before production. |
| Item | Standard specification |
|---|---|
| Timber finishes | Natural oak, walnut and other timber options in oil or matte lacquer, matched to your physical timber sample before production. |
| Colours | PU lacquer in RAL or NCS references, plus melamine and laminate project colours, with sheen and edge finish approved on samples. |
| Plank & face design | Vertical, horizontal, framed, grooved or plain faces, with grain direction and joins drawn to the leaf proportions. |
| Hardware finishes | Matt black as standard for the exposed style; brushed nickel, brushed brass and other coordinated finishes available by hardware selection. |
| Item | Standard specification |
|---|---|
| Track support | The track must fix into solid structure or suitable blocking, not unsupported plasterboard; wall construction and fixing positions are confirmed before production. |
| Wall & skirting clearance | The leaf must clear architraves, skirting, switches and furniture through its full travel; spacers and guide positions are shown on the drawing. |
| Floor guide | A floor or wall guide is required to control the bottom of the leaf; finished-floor compatibility and fixing are checked by your local installer. |
| Privacy & sealing | A barn door is not an airtight or acoustic seal around the opening. Where privacy or sound control matters, tell us early so we can assess the overlap and room choice honestly. |
| Item | Standard specification |
|---|---|
| Lead time | Typically 30–45 days after shop-drawing and sample approval; custom leaf designs, special finishes or soft-close systems may require 45–60 days. |
| Minimum order | No fixed MOQ when units ship with other categories in a mixed container; doors-and-windows-only orders are normally planned around one full container. |
| Shipping | FOB from our port or DDP to your door, quoted by destination; leaves are protected and flat-packed, with track and hardware boxed by opening. |
| Warranty | Warranty terms are confirmed by leaf and hardware selection at order stage, with spare rollers, guides, handles and service parts available for reorder. |
Timber, lacquer and engineered-core options for this barn door — physical finish and material samples are available for approval before production.
Veneer or solid timber option
Veneer or solid timber option
Matched to your timber sample
RAL or NCS colour to order
Project colour option
Stable core for interior leaves
The complete barn-door assembly: timber or engineered leaf, exposed track, rollers, anti-jump components, floor guide, handle and optional soft-close hardware.
The plan shows the leaf at open and closed positions, the track length and the wall it needs. That prevents a door that covers the opening beautifully but cannot slide far enough to clear it.
Wall construction, solid blocking and fixing positions are confirmed before the hardware is specified. A heavy timber leaf should never rely on unsupported plasterboard for its track fixings.
Rollers, track, anti-jump parts, floor guide and soft-close mechanism are selected after the leaf construction and dimensions are known, keeping operation and service requirements aligned.
Timber grain, plank layout, lacquer colour, track and handle finish are confirmed on samples and drawings, so the completed door reads as one coordinated interior element.
Material, hardware and factory documentation confirmed for your destination market and selected construction — no blanket performance claims applied to every custom leaf.
Quality-managed, audited production processes
E1 board as standard, E0 on request for applicable engineered panels
Track, roller or component test reports confirmed per selection
Applicable component documentation confirmed for the destination market
Saudi conformity documentation on request where applicable
Track fit, rollers, guides and leaf dimensions checked before packing
Every sliding barn door is specified to order. The options below are settled on the shop drawing and confirmed against physical samples before production, so the approved specification is what the shipment delivers.
Want every detail built your way? Talk to us — consultation is free.
As a one-stop factory for the whole home, we supply the full range of interior door constructions so you can coordinate them with the other materials in your project. The choice depends on swing space, wall availability, privacy, installation and the desired visual feature.
Leaves are protected and flat-packed, tracks are protected against bending, and rollers, guides and handles are boxed by opening number. Every package follows the room and opening references on the approved schedule.
Loading is planned in Foshan and photographed before the container is sealed. Barn doors can travel with the rest of your project in one mixed shipment, under one packing list and delivery window, FOB from our port or DDP to your door.
Opening sizes, leaf construction, travel, track, hardware, wall support and finish are approved before production.
You receive production records at key stages, including core preparation, veneer or lacquer finishing, edge work and hardware fitting.
The leaf is checked against the drawing; track fit, rollers, guides, handles and soft-close components are verified before packing.
Packages are numbered by room and opening, and the packing list doubles as the installation sequence.
Protection, bracing and load order are photographed before the container is sealed.
Report transit damage with photos within 7 days; replacement leaf or hardware components are assessed against the approved drawing and supplied accordingly.
Your local installer should verify wall support, opening dimensions, track level, leaf clearance and floor-guide position before fitting. The track must be fixed into solid structure, and the full travel should be tested before final adjustment.
Clean timber and lacquer with a soft, slightly damp cloth, keep the track and guide free of debris, and check rollers, stops, handles and anti-jump components periodically. Replacement hardware and finish-care materials can be ordered against the original schedule.
Where custom barn doors are worth specifying — homes, hotels, apartments, renovations and interiors that need a space-saving feature door.
A timber sliding leaf creates a visible design feature while avoiding swing clearance, with the travel space along the wall, furniture and hardware planned around the room.
Barn doors can suit wardrobes, bathrooms or room dividers where the desired privacy allows; hardware and finishes are selected for regular operation and service.
The exposed track avoids building a pocket wall, while custom overlap and travel details adapt the door to existing casings, skirting and tight layouts.
Repeatable leaf designs, coordinated finishes and opening-specific packing support multi-room supply and phased replacement hardware orders.
Straight answers on minimum orders, lead times, shipping and payment — before you commit.

Ivana Li
Senior Sales Director
Ten years focused on the global furniture and building-materials market, with deep project experience — you speak to her directly on WhatsApp.
Replies within one working day
Send your list and get a costed, itemised answer — no obligation, no sales pressure.
Yes. We draw the leaf, opening overlap, track length, travel and clearances from your finished opening and available wall. The open and closed positions are shown before production so you can confirm the door clears the opening.
The track must fix into solid masonry, timber or suitable structural blocking, not unsupported plasterboard. Tell us the wall construction and we mark fixing requirements and positions on the installation drawing.
Yes, compatible soft-close and damping hardware is available. The mechanism is selected according to leaf weight, track length and required operating action.
They can be, but a barn door does not create a full acoustic or airtight perimeter seal. Privacy, gaps, handle and latch choice should be assessed for the room. We confirm overlap and hardware before production.
Engineered cores with natural veneer, solid timber, vertical or horizontal planks, PU lacquer, melamine and laminate options are available. Grain direction, face design, edge finish and colour are approved on samples and drawings.
Yes. Single, paired double and bypass layouts are available. Travel direction, meeting position, wall space, track arrangement and floor guides are shown in plan before production.
We check the wall, architrave, skirting, switches and furniture through the full travel, then specify spacers and guide positions accordingly. Photos and measured wall details help us set the clearances accurately.
There is no fixed MOQ when doors ship with other categories in a mixed container; doors-and-windows-only orders are normally planned around one full container. Production is typically 30–45 days after drawing and sample approval, or 45–60 days for custom leaf designs, finishes or soft-close systems.
Pricing follows the leaf and hardware specification. The main drivers are leaf size and construction, face design, finish, track and rollers, soft-close, handle, privacy hardware and layout. Send your opening, wall dimensions, quantity and preferred finish for an itemised quotation.
Custom Sliding Glass Doors
Custom French Doors, Made to Order
Custom Aluminium Bifold Doors
Custom Aluminium Casement Windows
Custom Pivot Front Doors
Custom Lift-and-Slide Patio Doors
Custom Pocket Doors
Custom Arched French Doors
Custom Steel-Look Grid Glass Doors
Custom Fluted Glass Doors
Custom Double Front Doors Send the brief today and get a costed, itemised proposal — no obligation, no sales pressure.
Tell us the categories, quantities and destination port. Our sales director replies personally.
You send the list
Categories, quantities, destination port
We cost it line by line
Itemised quotation within 24 hours
You decide
No obligation, no sales pressure