Skip to main content
George Group logo George Group Home Foshan Factory Direct

Custom Pocket Doors

Custom pocket doors in timber, veneer and lacquer — concealed pocket frames, soft-close hardware and matched pulls, made to your opening and wall build-up in Foshan.

George Group builds custom pocket doors to your opening and wall build-up in Foshan — leaf, concealed pocket frame, track, rollers, recessed pulls and finish specified together before production. Standard production is 30–45 days after drawing approval, with mixed-container shipping worldwide FOB or DDP.

Lead time
30–45 days after approval
Minimum order
No fixed MOQ with mixed shipment
Customization
Made to your opening and wall
Shipping
FOB or DDP worldwide

A Custom Pocket Door Designed Around the Wall Cavity, Not Just the Opening

A made-to-order pocket door system — leaf, concealed pocket frame, track, rollers, pulls and finish drawn together to your opening, wall cavity and circulation plan.

A pocket door gives you a clear opening without swing space or an exposed sliding leaf, but it depends on a wall cavity that is built correctly. The pocket frame, track, leaf width, wall thickness, skirting and services all have to be coordinated before the wall is closed. Ours are drawn around your opening and wall build-up, so the door disappears into the wall without compromising the installation.

The timber leaf is shown partially open so its construction and edge pull remain visible; in use, it can slide completely into the left pocket wall. Engineered or solid timber, lacquer colours, soft-close operation and privacy pulls are selected for the room. Every set is labelled by room and opening number and can ship with your wider door and window order.

  • Leaf, pocket frame and wall cavity drawn as one system
  • Door fully concealed when open, with no exposed leaf or track
  • Engineered or solid timber with veneer and lacquer options
  • Concealed track, rollers, guides and recessed pulls
  • Soft-close, privacy-lock and double-pocket configurations
  • Room-and-opening labels with mixed-container shipping available
Chat on WhatsApp

Full specification

Dimensions, leaf construction, pocket frame, hardware, finishes and ordering terms — final values are fixed to the selected system and confirmed on your shop drawings.

Specifications
ItemStandard specification
Door leaf rangeTypical interior leaves run 600–1,200 mm wide, 2,100–2,700 mm high and 35–55 mm thick; final dimensions follow the opening, pocket frame and hardware selection.
Opening cover & clearancesLeaf width and height are drawn to suit the finished opening with even perimeter clearances, allowing for the pocket jamb kit and the finished floor level.
Pocket depth & lengthThe concealed cavity must accept the full leaf, track and running clearances; pocket depth and length are fixed to the leaf and wall build-up.
LayoutsSingle pocket, paired doors meeting at the centre and coordinated fixed panels are available, with pocket direction and meeting point shown in plan.

Material & finish samples

Timber, lacquer and engineered-core options for this pocket door — physical finish and material samples are available for approval before production.

Natural white oak, material sample

Natural white oak

Veneer or solid timber option

Natural walnut, material sample

Natural walnut

Veneer or solid timber option

Walnut-stained oak, material sample

Walnut-stained oak

Matched to your timber sample

Cream matte lacquer, material sample

Cream matte lacquer

RAL or NCS colour to order

Sage matte lacquer, material sample

Sage matte lacquer

Project colour option

Engineered core, material sample

Engineered core

Stable core for interior leaves

Materials & construction

The complete pocket-door assembly: timber or engineered leaf, concealed cavity frame, track, rollers, guides, recessed pulls and optional soft-close hardware.

  • The wall cavity is part of the product

    The pocket depth, length, framing and services are planned around the actual leaf. This prevents a door that fits the opening but cannot disappear fully into the wall.

  • The leaf disappears without leaving a second outline

    Open and closed positions are drawn from the same leaf coordinates. When open, the leaf is inside the pocket rather than standing in front of the wall or narrowing the passage.

  • Hardware is selected for weight and service

    Track, rollers, guides, soft-close and pulls are matched to the leaf construction and dimensions, with replacement parts linked to the original opening schedule.

  • Face and surrounding finishes stay coordinated

    Timber grain, lacquer colour, recessed pull and frame details are approved on samples and drawings, so the closed door sits naturally within the finished wall.

Certifications & compliance

Material, hardware and factory documentation confirmed for your destination market and selected construction — no blanket performance claims applied to every custom leaf.

  • ISO 9001 factory

    ISO 9001 factory

    Quality-managed, audited production processes

  • E1 · E0

    EN 717-1 emissions

    E1 board as standard, E0 on request for applicable engineered panels

  • SGS-tested hardware

    SGS-tested hardware

    Track, roller or component test reports confirmed per selection

  • CE-compliant components

    CE-compliant components

    Applicable component documentation confirmed for the destination market

  • SASO options

    SASO options

    Saudi conformity documentation on request where applicable

  • QC

    Operation checked

    Track fit, rollers, guides and leaf dimensions checked before packing

Customization options

Every pocket door is specified to order. The options below are settled on the shop drawing and confirmed against physical samples before production, so the approved specification is what the shipment delivers.

Dimensions
leaf width, height and thickness, finished opening, pocket depth, cavity length and clearances in millimetres.
Layout
single, paired or coordinated fixed-panel configurations, with pocket direction and meeting points shown in plan.
Leaf
engineered veneer, solid timber, plain, plank, framed, grooved, lacquer, melamine or laminate construction.
Hardware
concealed frame, track, rollers, guides, soft-close, recessed pulls, edge pulls and privacy locks.
Finishes
natural timber, oil, lacquer, RAL / NCS colours and coordinated hardware finishes.
Installation
wall build-up, service clearance, skirting, casing, floor guide and finished-floor details.
Documentation
room-by-room elevations, opening numbers, pocket dimensions and packing references.

Want every detail built your way? Talk to us — consultation is free.

Chat on WhatsApp

Pocket, barn or hinged: choosing an interior door by construction

As a one-stop factory for the whole home, we supply the full range of interior door constructions so you can coordinate them with the other materials in your project. The choice depends on available wall, swing space, privacy, installation stage and desired appearance.

Pocket
the leaf disappears into a prepared wall cavity, giving a clear opening with no exposed track or visible sliding leaf. It requires suitable wall depth and early coordination of structure and services.
Barn
the leaf slides on an exposed track and needs clear wall space beside the opening. It is easier to add in some renovations and makes the hardware visible, but it does not provide a full acoustic or airtight seal; see our custom sliding barn doors.
Hinged
the simplest construction and a conventional closing perimeter, but the leaf needs clear swing space. Hinges and locking are straightforward to service.
Our advice
choose pocket when the wall can be prepared and you want a clean concealed result, barn when exposed hardware suits the design and the wall is available, and hinged when simplicity and conventional sealing lead.

Packaging and shipping

Leaves are protected and flat-packed, pocket frames and tracks are protected against bending, and rollers, guides and pulls are boxed by opening number. Every package follows the approved room and opening schedule.

Loading is planned in Foshan and photographed before the container is sealed. Pocket doors can travel with the rest of your project in one mixed shipment, under one packing list and delivery window, FOB from our port or DDP to your door.

  1. Shop drawings confirmed

    Opening sizes, leaf construction, pocket cavity, track, hardware, wall build-up and finish are approved before production.

  2. In-production photos

    You receive production records at key stages, including core preparation, veneer or lacquer finishing, pocket-frame assembly and hardware fitting.

  3. Pre-shipment inspection

    The leaf and pocket system are checked against the drawings; track fit, rollers, guides, pulls and soft-close components are verified.

  4. Packing list by opening

    Packages are numbered by room and opening, and the packing list doubles as the installation sequence.

  5. Container loading photos

    Protection, bracing and load order are photographed before the container is sealed.

  6. After-delivery support

    Report transit damage with photos within 7 days; replacement leaf or hardware components are assessed against the approved drawing and supplied accordingly.

Installation and maintenance

Your local installer should verify wall construction, cavity dimensions, track level, leaf clearance and guide position before closing the wall. Services must stay clear of the pocket, and the full travel should be tested before final finishes are completed.

Clean timber and lacquer with a soft, slightly damp cloth, keep the track access and guides clear of debris, and check rollers, stops, pulls and soft-close components periodically. Replacement hardware and finish-care materials can be ordered against the original schedule.

Where it works best

Where custom pocket doors are worth specifying — apartments, villas, hotels, renovations and interiors that need a clear opening without swing or exposed hardware.

Apartments and compact interiors

A concealed leaf avoids both swing clearance and an exposed sliding panel, helping tight rooms and corridors keep their circulation clear.

Villas and design-led homes

Plain timber or lacquer leaves sit flush within the wall, with matched pulls and surrounding finishes for a clean interior appearance.

Hotels and guest suites

Pocket doors can suit bathrooms, wardrobes and room dividers where wall construction and privacy requirements allow, with serviceable concealed hardware.

Developers and renovation projects

Repeatable pocket systems, coordinated finishes and opening-specific packing support multi-room supply and phased replacement hardware orders.

FAQ

Questions importers ask us first

Straight answers on minimum orders, lead times, shipping and payment — before you commit.

Ivana Li, Senior Sales Director at George Group

Ivana Li

Senior Sales Director

Ten years focused on the global furniture and building-materials market, with deep project experience — you speak to her directly on WhatsApp.

Replies within one working day

Still have a question?

Send your list and get a costed, itemised answer — no obligation, no sales pressure.

Chat on WhatsApp
Can you make a pocket door to my exact opening and wall?

Yes. We draw the leaf, opening size, pocket depth, cavity length, track and clearances from your finished opening and wall build-up. The open and closed positions are shown before production.

Does the door disappear completely when open?

Yes, when the pocket is built to the approved dimensions. The leaf slides fully into the concealed wall cavity, leaving the opening clear without an exposed panel standing in front of the wall.

Can a pocket door be installed in an existing wall?

Sometimes, but the wall must provide or be rebuilt to provide the required cavity and support. Wiring, pipes and reinforcement must be identified first; it is not simply a surface-mounted installation.

Can a pocket door be soft-closing?

Yes, compatible soft-close and damping hardware is available. The mechanism is selected according to leaf weight, track length and required operating action.

Are pocket doors suitable for bathrooms or bedrooms?

They can be, subject to wall construction, ventilation and privacy requirements. Recessed pulls, privacy locks and, where the system allows, brush or interlock seals are selected for the room; performance depends on the complete installation.

What leaf materials and finishes are available?

Engineered cores with natural veneer, solid timber, PU lacquer, melamine and laminate options are available. Plain, plank, framed or grooved faces, grain direction, edge finish and colour are approved on samples and drawings.

Can you make double pocket doors?

Yes. Paired doors can slide into pockets on opposite sides and meet at the centre. Both pocket cavities, meeting clearances, pulls and locking details are shown in plan and elevation.

What is the minimum order and lead time?

There is no fixed MOQ when doors ship with other categories in a mixed container; doors-and-windows-only orders are normally planned around one full container. Production is typically 30–45 days after drawing and sample approval, or 45–60 days for custom leaf designs, finishes or double-pocket systems.

How much does a custom pocket door cost?

Pricing follows the leaf, pocket and hardware specification. The main drivers are leaf size and construction, face design, finish, concealed frame, track, rollers, soft-close, pulls and privacy hardware. Send your opening, wall build-up, quantity and preferred finish for an itemised quotation.

Ready to price your project?

Send the brief today and get a costed, itemised proposal — no obligation, no sales pressure.

Free quotation

Get your free quote in 24 hours

Tell us the categories, quantities and destination port. Our sales director replies personally.

What happens next

  1. You send the list

    Categories, quantities, destination port

  2. We cost it line by line

    Itemised quotation within 24 hours

  3. You decide

    No obligation, no sales pressure

We send quotations and photos straight to this number.

Chat on WhatsApp

Fields marked * are required.

We use your details only to answer this inquiry. No newsletters, no sharing.

Free quotation

Get your free quote

Name and WhatsApp number are all we need — a coordinator replies within one working day.

We send quotations and photos straight to this number.

Fields marked * are required.